------Steps to follow------
Step 01: Clean the surface with a dry cloth. Then mark the desired place.

Step 02: Place the wall sticker on a plain table or hard surface than smooth out the backing paper using ID card/bank card or plastic squeegee so that no bubble left.


Step 03: Carefully remove the backing paper at the flat angle to ensure that the decal remains to adhere to the application tape.

Step 04: Affix the decal to the desired location with the adhesive side facing the surface.

Step 05: Smooth out the application tape using plastic squeegee or card, make sure the sticker is properly applied to the surface.

Step 06: Carefully peel off the application tape from the upper right corner at the flat angle. Peel completely. If any part is not affixed to the wall properly, press them using the squeegee.

Step 07: Done! See your colorful room after applying all the stickers you have.

-----Warnings-----
• Do not apply wall stickers if your wall is newly painted. Wait at least 3 - 4 weeks.
• Clean properly, no dust or grease oil should remain on the surface.
• Do not apply to wallpaper. It may damage wallpaper when removed.